Anti Graffiti Coating #AG2

AG#2 Anti-Graffiti Coating  is a special modified water-based urethane and acrylic coating that is non-hazardous with low VOC content.. This unique formulation provides a hard and durable clear gloss finish that also seals the surface and provides easy removal of graffiti. This coating is considered "sacrificial" in nature. This means that the coating itself is removed once graffiti has been applied. This can be done using a pressure washer or paint remover.
Can be applied on all poured concrete, masonry, stucco, drywall, brick, metal and wood surfaces.

TYPICAL USES: For industrial, commercial and residential use on surfaces of metal, masonry, wood, poured concrete, stucco, brick and block .

PRODUCT ADVANTAGES: Safe * Economical * Effective * Fast * Water Clean-up * Low VOC

PHYSICAL PROPERTIES:
* Physical State: Color Milky - Dries Clear
* Gloss: Slight Sheen
* Solids: By Volume: 34.53% By Weight: 35.16%
* Coating VOC: 0.40 Lb/Gal (48 Grams/Liter)
* Flash Point: Non Flammable
* Theoretical Coverage: 100-300 sq.ft./gal depending on porosity of substrate (2 coats required)

APPLICATION:
Method: Brush, Roll or Spray
Estimated Dry Time: To Touch 30 minutes; Recoat in 24 Hours; Fully Cures in 72 Hours
Available in 1 Gal, 5 Gal, and 55 Gal drums
1 Gallon: $32.95 ...5 Gallon: $164.75

  Or 

Order |  Painting Tips |  Shipping |  International |  Questions? |  Site Map |  HOME