insulating paints and insulating paint additives INSULATING Energy Saving
Roof Coating
spaceage insulating ceramicsNASA Technology Insulating Ceramicsspaceage insulating ceramics
Order |  Painting Tips |  Shipping |  International |  Questions? |  Site Map |  HOME

Insulating Roof Coating
Insul Cool-Coat #2000

Insul Cool-Coat is a high build 100% acrylic elastomeric roof coating based on the latest chemical technology and fortified with Hy-Tech insulating ceramic microspheres. This bright white high build formula is designed to insulate, seal, repel moisture, deaden sound, and protect. The thick rubber-like ceramic reinforced shield expands and contracts with varying hot and cold temperatures plus resists thermal shock. Insul Cool-Coat offers superior mildew resistance, soundproofing, UV ray reflectivity, corrosion resistance and a beautiful insulating finish.
Insul Cool-Coat does NOT withstand ponding water or stop leaks. For these properties please see our premier roof coating Roof Guard

Hy-Tech roof coatings are an inexpensive solution to re-roofing providing many years of durable protection, outstanding beauty and energy savings. Buildings in California and Florida with cool roofing have shown 20% to 70% reductions in cooling energy use.
Features: Hy-Tech insulating roof paint and coatings have reflectivity (over 80% white) and high emissivity (over 90% ) properties which combine to eliminate most thermal stress in a roof system by creating a radiate barrier to block solar energy, and by releasing any absorbed heat quickly, avoiding heat build-up in the roof and substrate. Traditional roof materials retain heat in a building throughout the night because of their low emittance values.

The Hy-Tech ceramic microspheres resist wear and degradation from ultra violet radiation, extending the useful life of the system. The insulating effects of the product remain constant throughout its useful life.
Over a whole day up to 50% of the solar heat load is prevented from entering a building's coated roof and internal building temperatures can be reduced by over 60° F after the application of an insulating roof coating.
When applied according to Hy-Tech specifications Insul Cool-Coat provides an inexpensive solution to re-roofing providing many years of durable protection and outstanding beauty.
USES:
Insul Cool-Coat is recommended for well drained Sloped roof surfaces only (minimum of 2 degrees or 1" per 2 foot of slope. Excellent adhesion to wood shakes, plywood, primed metal, galvanized, aluminum, tin, copper, asbestos, asphalt, urethane, polyester, styrofoam, built up roof, asphalt shingles, rolled roofing, concrete, clay and masonry tiles.

Two coats of Insul Cool-Coat are required and it may be applied by brush, roller or spray with a minimum tip size of .025 and all filters removed from spray equipment.
Surface Preparation: A primer/sealer coat of #1220 Bond-It is required prior to application of Insul Cool-Coat to insure adhesion. The average cost per square foot for this roof coating system is Bond it Primer = .13 ~ Insul Cool-Coat, 2 coats = .46 ~ Total .59 per square foot

Finish-White
Spread Rate- 100-150 sq.ft/gal
Dry to touch- 2-4 hours
Recoat-12 hours...Cure Time 5-7 days
Sizes: 1 Gal., 5 Gal.
$28.50 Per Gallon...5 Gallon $142.50

buy insulating paint  Or
  order insulating paint

Related:-
How To Apply
Examples... Before and After
Roof Guard #2050 Designed for flat roofs that are prone to ponding water.
Permacoat Plus #2100 Any roof, sloped or flat requiring a Class "A" Fire Rating!
Bus Kote #2150 Bus & Recreational Vehicle Coating
Flexi-Clear #60 Clear elastomeric roof coating for shingles and shakes
House Paint Roof Coatings Clear Coatings
Primers-Sealers Fire Retardants Specialty Coatings Supplies-Sundries

cool roofs cool communities Order |  Painting Tips |  Shipping |  International |  Questions? |  Site Map |  HOME buy with confidence

Mailing Address: Hy-Tech - P.O. Box 216, Melbourne, FL 32902
Fax: 321 984-1022

©Copyright 2003-2007 and terms of use- All Rights Reserved